# Setup: Standard The Brewing Systems ships standard with one 3-way valve. This will normally be placed on the right side of the system, but if you don't want to sparge using the internal pump, you can install it on the left side to enable whirlpooling. Remember to get an extra dip tube if you want to use this option By adding more valves, the flexibility will increase, and you can partly or completely avoid having to disconnect tubing or pipes during your brewday. What setup is the best, is subjective. A general advice is to start with the 2-valve starter pack and expand as you get more experience. ![Standardoppsett](https://www.brewtools.no/Media/Publisher/ArticleImages/Standardoppsett1812548071_scaled_640.Png) S = Temperatur sensor --- # Agent Instructions: Querying This Documentation If you need additional information that is not directly available in this page, you can query the documentation dynamically by asking a question. Perform an HTTP GET request on the current page URL with the `ask` query parameter: ``` GET https://docs.brewtools.com/brewing/pro-series-brewing-system/pro-series-brewing-system/setup-standard.md?ask= ``` The question should be specific, self-contained, and written in natural language. The response will contain a direct answer to the question and relevant excerpts and sources from the documentation. Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.